Skip to content
Delivered anywhere in Kenya — price includes deliveryPay with M-Pesa or card
Prices include delivery.

Where should we deliver?

Prices include delivery and depend on your area.

Installation guide

Follow these steps so your tank lasts its full lifespan.

Do

  1. Place the tank on a flat, level base with no gaps.
  2. Make the base wider than the tank.
  3. Remove any stones or sharp objects from the base.
  4. Drill inlet and outlet holes only in the marked areas, using a drilling machine.
  5. Always provide an overflow pipe that drains away from the base.
  6. Use only plastic fittings and flexible pipes when connecting two tanks.
  7. Always use a rubber washer between the tank and the rear nuts.

Connecting pipes

  • Use the correct pipe sizes and fittings for the inlet, outlet and overflow.
  • Seal every joint properly so it doesn't leak.
  • Position the inlet, outlet and overflow correctly before filling the tank.
  • Handle the tank carefully when moving it into place: don't drag or drop it.

Common mistakes to avoid

  • Placing the tank on an uneven or weak base.
  • Poor sealing of joints, which leads to leaks.
  • No overflow, or an overflow that drains onto the base.

Don't

  • Don't drill holes with a hot metal rod or knife.
  • Don't leave stones or sharp objects on the base.
  • Don't raise large tanks more than 20 ft above the ground.

Harvesting rainwater? See our rainwater harvesting guide.

Rather have a plumber do it?

Our plumbers install tanks on the ground, on rooftops and on stands, and fit booster pumps where the pressure is low. See water tank installation or all our plumbing services.

Note: Restore Water Tanks is not liable for damage caused by not following these installation guidelines.