Rainwater harvesting
Catch the rain on your roof, store it in a KENTANK, and cut your water bills. Use the calculator to size your tank.
m²
Length × width of the roof as seen from abovemm
Check the figure for your area; 1 mm on 1 m² = 1 litrepeople
litres
days
How long the stored water should lastYour roof can collect12,000 L / month
You need to store7,500 L
Recommended tank
KENTANK 8,000 L
from Ksh 77,014 delivered (Nairobi)
How it works
- Catchment: your roof. Iron sheets and tiles work best, and every 1 mm of rain on 1 m² of roof gives about 1 litre of water.
- Conveyance: gutters and downpipes carry the water from the roof edge to the tank.
- Storage: a sufficiently large, food-grade KENTANK keeps the water clean and dark, so algae can't grow.
Tips for clean water
- Clean gutters before the rains start, and keep overhanging branches cut back.
- Let the first rain of the season wash the roof before you collect it, or fit a first-flush diverter.
- Put a fine mesh over the tank inlet to keep out leaves and mosquitoes.
- Run the overflow pipe well away from the tank base.
- Treat or boil harvested water before drinking it.
Choosing the size
Size the tank to the smaller of two numbers: the water your roof can collect in a wet month, and the water your household needs to get through a dry spell. If you need more than one tank, connect them with plastic fittings and flexible pipes. See the installation guide, or have our plumbers install the tank and connect the gutters.
